CABRESTANTES HIDRÁULICOS

Descripción

The Ramsey RPH 15,000-Y is a Industrial Hydraulic Planetary Winch developed to meet a need for increased line speed for vehicle recovery and other industrial uses. It features easy free spooling, single lubricant for all temperature ranges and it's rugged, powerful, yet light weight. The RPH 15,000-Y has a standard drum that holds 195 ft. of cable.   

Especificaciones

icono-pdfrph15-2 icono-pdfrph15-3  icono-pdfrph15-4  icono-pdfrph15-5

 

Ramsey Winch Planetary Hydraulic Winches deliver fast, powerful winching pull after pull. With working capacities of 8,000 lbs. (3,640 kgs) to 130,000 lbs. (58,967 kgs) designed for the demands of the towing and recovery, utility, oil & gas, and mining & construction applications, Ramsey has the industrial hydraulic winch you need. Fast line speeds limit time in the danger zone as well as increase efficiency and productivity on the job. Cables can be under-wound to minimize strain on the winch, or overwound reducing risk of damage to the load. Many models can be either foot or side mounted for adaptability and ease of maintenance.
Ramsey Winch Hydraulic Planetary Winches are tested and certified to operate in temperatures from -40° F to 120° F. Our winches offer easy, fast free spooling with only 50 lbs. resistance at -35ºF and can be operated by air or manually, providing fast line payout and reducing wear on components. Ramsey Winch Hydraulic Planetary Winches are manufactured to meet SAE J706 standards for US models and to meet EN14492-1 standards for EU models.

Additional benefits include:
Single lubricant for all-temperature operation to -35ºF
Compact design reduces cable catch between drum flange and end support housing
Lighter weight than comparable models while still offering legendary Ramsey durability and rugged construction
Level winders and cable tensioners are available for many models. Call factory to determine availability of accessories for any specific winch.
2-speed motor available on some models

FEATURES
Rated Line pull 15,000 lbs
Short Drum
Recommended cable 1/2"
Available with air shift
Meets SAE J706
Made in the USA

APPLICATIONS
General Industrial
Mining & Construction
Railroad
Specialty Vehicle
Towing & Recovery
Towing & Recovery (Heavy Wrecker)
Towing & Recovery (Medium Wrecker)
Trailer
Utility

SPECIFICATIONS
Rated line pull and line speed is based on the first layer of cable.

 

  • Rated Line Pull 15,000 Lbs / 6,800 Kg
    Gear Reduction 7.7:1
    Weight w/o Cable 290 Lbs / 131 Kg
    Overall Dimensions (L x W x H) 29.07 x 12.66 x 11.38 In / 738.3 x 321.5 x 289.1 MM
    Brake Yes
    Cable None
    Drum Size (L x F x B) 9.00 x 11.00 x 4.75 In / 228.6 x 279.4 x 120.7 MM
    Cable Capacity 195.0 Ft / 60.0 M
    Recommended Cable Size 1/2 In / 13.0 MM
    1st Layer Line Speed 25 Ft/Min / 7.6 M/Min
    Hydraulic Pressure Required for Rated Line Pull 2,500 PSI
    Hydraulic Flow Required for Rated Line Speed 15 GPM
    Motor 24 Cu. In.
    Additional Motor Options None
    Clutch Type Sliding Pin
    Clutch Control Air, Manual

  • WARNING
    Winches, capstans and hoists are not intended to be used for lifting or moving of persons.

    CAUTION
    The last 5 wraps of cable must be left on the drum to assist the cable clamp in holding the load.